Consequences of the peculiar intrinsic properties of MgB2 on its macroscopic current flow

The influence of two important features of magnesium diboride on the macroscopic transport properties of polycrystalline MgB2 is discussed in the framework of a percolation model. While two band superconductivity does not have significant consequences in the field and temperature range of possible power applications, the opposite is true for the anisotropy of the upper critical field. The field dependence of the critical current densities strongly increases and the macroscopic supercurrents disappear well below the apparent upper critical field. The common scaling laws for the field dependence of the volume pinning force are altered and Kramer's plot is no longer linear, although grain boundary pinning dominates in nearly all polycrystalline MgB2 conductors. In contrast to the conventional superconductors NbTi and Nb3Sn, a significant critical current anisotropy can be induced by the preparation technique of MgB2 tapes

Influence of disorder on Hc2-anisotropy and flux pinning in MgB2

The upper critical field and flux pinning in MgB2 single crystals were investigated. The implications of these properties for technical applications are discussed and compared with transport properties of polycrystalline bulk samples and wires. In these untextured materials current percolation is important, especially at high magnetic fields. It is shown that the anisotropy of the upper critical field influences the "irreversibility line" and that the application range of MgB2 is limited by the smallest upper critical field (i.e., for the field direction perpendicular to the boron planes). Disorder, introduced by irradiation with neutrons, enhances the upper critical field, reduces the anisotropy and drastically changes flux pinning. While the enhanced Hc2 and the reduced anisotropy generally improve the transport properties of the polycrystalline samples, the contribution of the radiation-induced defects to flux pinning is small compared to the as-grown defect structure (grain boundary pinning).Comment: 7 pages, 13 figure

Influence of the upper critical field anisotropy on the transport properties of polycrystalline MgB2_{2}

The intrinsic properties of MgB$_2$ form the basis for all applications of this superconductor. We wish to emphasize that the application range of polycrystalline MgB$_2$ is limited by the upper critical field H$_{c2}$ and its anisotropy. In wires or tapes, the MgB$_2$ grains are randomly oriented or only slightly textured and the anisotropy of the upper critical field leads to different transport properties in different grains, if a magnetic field is applied and the current transport becomes percolative. The irreversibility line is caused by the disappearance of a continuous superconducting current path and not by depinning as in high temperature superconductors. Based on a percolation model, we demonstrate how changes of the upper critical field and its anisotropy and how changes of flux pinning will influence the critical currents of a wire or a tape. These predictions are compared to results of neutron irradiation experiments, where these parameters were changed systematically

Neutron irradiation of coated conductors

Various commercial coated conductors were irradiated with fast neutrons in order to introduce randomly distributed, uncorrelated defects which increase the critical current density, Jc, in a wide temperature and field range. The Jc-anisotropy is significantly reduced and the angular dependence of Jc does not obey the anisotropic scaling approach. These defects enhance the irreversibility line in not fully optimized tapes, but they do not in state-of-the-art conductors. Neutron irradiation provides a clear distinction between the low field region, where Jc is limited by the grain boundaries, and the high field region, where depinning leads to dissipation

Anisotropic critical currents in FeSe0.5Te0.5 films and the influence of neutron irradiation

We report on measurements of the superconducting properties of FeSe05Te05 thin films grown on lanthanum aluminate. The films have high transition temperatures (above 19 K) and sharp resistive transitions in fields up to 15 T. The temperature dependence of the upper critical field and the irreversibility lines are steep and anisotropic, as recently reported for single crystals. The critical current densities, assessed by magnetization measurements in a vector VSM, were found to be well above 10^9 Am-2 at low temperatures. In all samples, the critical current as a function of field orientation has a maximum, when the field is oriented parallel to the film surface. The maximum indicates the presence of correlated pinning centers. A minimum occurs in three films, when the field is applied perpendicular to the film plane. In the forth film, instead, a local maximum caused by c-axis correlated pinning centers was found at this orientation. The irradiation of two films with fast neutrons did not change the properties drastically, where a maximum enhancement of the critical current by a factor of two was found

Critical currents in weakly textured MgB2: Nonlinear transport in anisotropic heterogeneous media

A model for highly non-linear transport in heterogeneous media consisting of anisotropic particles with a preferred orientation is proposed and applied to the current transport in weakly textured magnesium diboride, MgB2. It essentially explains why, unlike in conventional superconductors, a significant macroscopic anisotropy of the critical currents can be induced by the preparation of MgB2 tapes. The field and angular dependence of the critical current is calculated for various degrees of texture and compared to experimental data

Disorder effects on the superconducting properties of BaFe1.8_{1.8}Co0.2_{0.2}As2_2 single crystals

Single crystals of superconducting BaFe$_{1.8}$Co$_{0.2}$As$_2$ were exposed to neutron irradiation in a fission reactor. The introduced defects decrease the superconducting transition temperature (by about 0.3 K) and the upper critical field anisotropy (e.g. from 2.8 to 2.5 at 22 K) and enhance the critical current densities by a factor of up to about 3. These changes are discussed in the context of similar experiments on other superconducting materials